by WinnManufacturing | Apr 17, 2017 | Blog
At Winn Speed Lock we have a 1997 Kitamura Mycenter 3 vertical machining center with a pallet changer. We use to produce some of the parts for the Speed Lock 6″ vise with the integrated quick change jaw system. We purchased this CNC machining center used in...
by WinnManufacturing | Apr 10, 2017 | Blog
Recently at Winn Mfg. we received an order for two different rope sheaves made from MDS Nylon. The machining for these parts was done on two of our CNC lathes. These particular parts were a little different from the type of sheave we normally do, in that the...
by WinnManufacturing | Feb 10, 2017 | Blog, Trade Shows
Southwestern Industries is having an open house to display their Trak CNC machines on March 15th from 9:00 am to 3:00 pm. The location of the open house is 167B Memorial Drive, Unit 3, Shrewsbury, MA 01545 Winn Manufacturing will be demonstrating the Quick Change Vise...
by WinnManufacturing | Jan 19, 2017 | Blog
Recently at Winn Speed Lock Vise we designed a set of covers to be used on the movable mounting block and the fixed mounting block to keep chips out of the slots where the round nuts and 1/2-13 socket head cap screws drop into. We have found that this has only been an...
by WinnManufacturing | Jan 19, 2017 | Blog
Back in December of 2016 we had a problem with our Fanuc RoboDrill here at Winn Mfg., manufacturer of the Winn Speed Lock Vise. On a Monday morning I had our tooling and fixture machinist, who was working on a new fixture for a job on our Fanuc RoboDrill (Circa 1997...